발광 효율은 광원의 특성입니다., which indicates what portion of the emitted electromagnetic radiation is usable for human vision. It is the ratio of emitted luminous flux to radiant flux. Luminous efficacy is related to the overall efficiency of a light source for illumination, but the overall lighting efficiency also depends on how much of the input energy is converted into electromagnetic waves (whether visible or not).
The luminous efficacy describes the efficacy of a lamp. It is expressed as the ratio of the emitted luminous flux in lumen and the power used in watts. The theoretically attainable maximum value assuming complete conversion of energy at 555 nm would be 683 루멘/와트. The luminous efficacies that can actually be attained vary depending on the lamp,
Luminous efficacy measures the fraction of electromagnetic power which is useful for lighting. It is obtained by dividing the luminous flux by the radiant flux. Light with wavelengths outside the visible spectrum does not contribute to the efficacy at all, because the luminous flux of such light is zero. Wavelengths near the peak of the eye’s response contribute more strongly than those near the edges.
In SI, luminous efficacy has units of lumens per watt (루멘/와트). Photopic luminous efficacy has a maximum possible value of 683 루멘/와트, for the case of monochromatic light at a wavelength of 555 nm (녹색). Scotopic luminous efficacy reaches a maximum of 1700 lm/W for narrowband light of wavelength 507 nm.
In some other systems of units, luminous flux has the same units as radiant flux. The luminous efficacy is then dimensionless. 이 경우, it is often instead called the luminous efficiency or luminous coefficient and may be expressed as a percentage. 예를 들어, it is common to express the luminous efficiency in units where the maximum possible efficacy, 683 루멘/와트, corresponds to an efficiency of 100%. The distinction between efficacy and efficiency is not always carefully maintained in published sources, so it is not uncommon to see “efficiencies” expressed in lumens per watt, or “efficacies” expressed as a percentage.
Lighting efficiency
Artificial light sources are usually evaluated in terms luminous efficacy of a source, also sometimes called overall luminous efficacy. This is the ratio between the total luminous flux emitted by a device and the total amount of input power (electrical, etc.) it consumes. It is also sometimes referred to as the wall-plug luminous efficacy or simply wall-plug efficacy. The overall luminous efficacy is a measure of the efficiency of the device with the output adjusted to account for the spectral response curve (the “luminosity function”). When expressed in dimensionless form (for example, as a fraction of the maximum possible luminous efficacy), this value may be called overall luminous efficiency, wall-plug luminous efficiency, or simply the lighting efficiency.
The main difference between the luminous efficacy of radiation and the luminous efficacy of a source is that the latter accounts for input energy that is lost as heat or otherwise exits the source as something other than electromagnetic radiation. Luminous efficacy of radiation is a property of the radiation emitted by a source. Luminous efficacy of a source is a property of the source as a whole.
The following table lists luminous efficacy of a source and efficiency for various light sources:
|
범주 |
Type |
Overall |
Overall |
| Combustion | candle | 0.3 | 0.04% |
| gas mantle | 1–2 | 0.15–0.3% | |
| Incandescent | 100–200 W tungsten incandescent (220 다섯) | 13.8–15.2 | 2.0–2.2% |
| 100–200–500 W tungsten glass halogen (220 다섯) | 16.7–17.6–19.8 | 2.4–2.6–2.9% | |
| 5–40–100 W tungsten incandescent (120 다섯) | 5–12.6–17.5 | 0.7–1.8–2.6% | |
| 2.6 W tungsten glass halogen (5.2 다섯) | 19.2 | 2.8% | |
| tungsten quartz halogen (12–24 V) | 24 | 3.5% | |
| photographic and projection lamps | 35 | 5.1% | |
| Light-emitting diode | white LED (raw, without power supply) | 4.5–150 | 0.66–22.0% |
| 4.1 W LED screw base lamp (120 다섯) | 58.5–82.9 | 8.6–12.1% | |
| 6.9 W LED screw base lamp (120 다섯) | 55.1–81.9 | 8.1–12.0% | |
| 7 W LED PAR20 (120 다섯) | 28.6 | 4.2% | |
| 8.7 W LED screw base lamp (120 다섯) | 69.0–93.1 | 10.1–13.6% | |
| Arc lamp | 크세논 아크 램프 | 30–50 | 4.4–7.3% |
| mercury-xenon arc lamp | 50–55 | 7.3–8.0% | |
| Fluorescent | T12 tube with magnetic ballast | 60 | 9% |
| 9–32 W compact fluorescent | 46–75 | 8–11.45% | |
| T8 tube with electronic ballast | 80–100 | 12–15% | |
| T5 tube | 70–104.2 | 10–15.63% | |
| Gas discharge | 1400 W sulfur lamp | 100 | 15% |
| metal halide lamp | 65–115 | 9.5–17% | |
| high pressure sodium lamp | 85–150 | 12–22% | |
| low pressure sodium lamp | 100–200 | 15–29% | |
| Ideal sources | Truncated 5800 K blackbody | 251 | 37% |
| Green light at 555 nm (maximum possible LER) | 683.002 | 100% |
|
SI 측광 단위
|
|||||||||||||||||||||||||||||||||||||||||
|