Outdoor LED lighting project has been very common, but the application of the indoor lighting is in the initial stage, this is because the cost is too high for high lumens, on the other hand, LED interior lighting also because the categories of LED indoor lights is small, lighting designers suffer litle choice but to obstacle LED indoor lighting products. Personally, LED indoor lighting product development and promotion should focus on the following five aspects:
1, product serialization
1, product serialization
The traditional lamp can be numerous, downlights, spotlights, Grille, lantern and chandelier. this compose commercial lighting and household lighting, dominate the direction of the lighting. Currently applied to indoor LED lighting products are LED lights Cup, LED floor tiles and other decorative lighting, compare to other traditional lighting LED light source is the application of rare, but an enormous potential market beyond doubt, with the LED luminous efficiency improvement and price lower, The one first developed the series products, the market will seize the opportunity.
2, product integration, intelligent
LED of one of the greatest advantages is easily controlled and Cluster control, in some occasions the need for programmability, LED products to provide a range of intelligent solutions, including a three-color LED and microprocessor smart LED products, DMX512 communication protocol can be configured in, and running online. Provide intelligent of indoor lighting with convenient management, can also cut down the LED high input costs.
3, the product of human nature
Lighting, after a series of evolution, is slowly become a fashion, personal lighting products has become the first choice, and the small LED, unlike traditional light sources have a glass, led lights are easy to be controlled, in the design of lamp appearance, the LED lamp manufacturers play unlimited space.
4, increase the luminous efficiency, lower the cost of the integrated lighting
Although the LED luminous efficiency not good as some of the light source traditional light sources, but as a result of strong directional light-emitting LED light source, high availability, so as long as the adoption of reasonable optical processing, maximum use of its flux in the illumination area, LED function can be achieved lighting requirements.
Under the same conditions to test 3W LED and 35W halogen illumination Cup. Around 3m LED illumination light source is much higher than halogen Cup, the lamp lighting the common cup in the 1-3 m range, the lights 3W LED significantly better lighting effects Cup 35W halogen Cup, mainly because halogen Cup with bad flux.
5, Slove the heat elimination technology, delay the LED attenuation.
LED high-power LED industry is one of the directions for future development, at present because of their higher efficiency and superior light lumens, many companies competing in LED lights. But high-power LED requires good heat elimination technical, ambient temperature reached a certain limit will soon have a light attenuation, a direct result of the decline lifespan of LED. At present, 1W and 3W are used frequently in the LED application market, but 5W, and 10W high-power LED remains in the researsh. Only by Slove the heat elimination technology, delay the LED attenuation, that the LED applications can be large-area promoted.
At present, LED can be alternative for replace conventional light in many places, in particular the emergence of high-power LED, and accelerated the LED light source to replace conventional lighting, but also makes LED lighting in indoor applications become a reality in large area, lead the industry matures. Along with the development of LED, there will be better energy efficient and price, we believe that the next decade, LED will be the same as the common fluorescent tube.
